​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​
Welcome to Natures Energies .... Over 1400 Products and Growing!
Positive SSL
Menu

Instruction on Using the Inert Gas Devices

Click here to read about about the theory and use of the inert gas devices in general.


Before using these devices, please read the Inert Gas Devices medical disclaimer.

Using the DevicesWarning: These devices contain a magnetic field and should not be used by people with pacemakers or who are otherwise sensitive to magnetic fields. The devices should be kept away from mobile phones, credit cards, computer hard drives and other equipment sensitive to magnetism. We recommend to keep the IGDs more than 50cm from such devices. They should also, as all gas bottles should be, kept away from heaters, direct sunlight or other sources that would cause excessive pressure overload in the devices (even though we have built 40x design pressure capability into these units under natural conditions!)  that could result in serious injury from explosion in rare circumstances (there is a very high safety factor in our devices). There are also many reported cases of the xenon gas containing devices resulting in vasectomy and cauterized fallopian tubes becoming reversed unexpectedly so beware of that some things may heal in your body unexpectedly.

How to identify the device

Identifying Unidirectional DevicesIf you have purchased the complete set, you will need to be able to distinguish between each of the devices. On the bottom of the device, you will see 2 letters (for the pure gas devices only) and a number, as in the picture to the right. The 2 letters indicate which gas is in the device as follows;

  • HE - Helium
  • NE - Neon
  • AR - Argon
  • KR - Krypton
  • XE - Xenon

The picture to the right shows the letters KR indicating that it contains Krypton gas. Each device that is released through Natures Energies has its own unique number, which is recorded into a register. The unique number on the device in the picture to the right is 10116. If at any time you are unsure what is contained in an inert gas device that you have received from us, simply email us the number, and we will check the register and let you know the gas mixture in your device. Devices with mixed gases do NOT contain the 2 letters as in the example shown to the right. The 2 letters are only for devices with pure inert gases.

Identifying Unidirectional DevicesIdentifying Unidirectional Devices (no longer built)

Unidirectional devices are only made for special cicumstances. If the number on the bottom of your device is followed by the letters DM (e.g., 10116DM), it means that there is a double magnet (DM) inside the device with 2 north poles facing one another in the gas chamber, to create a powerful excitation effect. This means that the device is unidirectional and that the field effect is emitted from the sides of the device at an angle of 10 degrees upward and 10 degrees downward from the horizontal plane.

When you first receive your new device - the "adjustment process"

When you first receive your new device, we recommend that you place it 2-3 metres away from your bed on the floor with the engraved logo on the top pointing upwards. You can do this even if it is placed in an adjoining room or cupboard, as the beam will pass through walls. It is necessary to do this for up to a week to allow your body to get used to, and to adjust to the concentrated ether energy. You may find that you feel a little uneasy, and restless when you sleep in the adjustment period. If necessary, move the device even further from the bed but try and ride out the storm. You may also find after the first day that there are sore muscles or other parts or on your body. These may represent thought forms that were once attached to your body, and have now been dissolved. The soreness is toxins being released into the physical flesh, and it typically lasts 2-4 days. After a week, move it a metre closer to you bed, and when you feel comfortable, proceed to the next step, where it is placed directly beside or underneath your bed. The adjustment period has now been completed.

Where to place the device

The devices are normally placed underneath or on the floor next to your bed with the engraved logo on the top of the device pointing upwards. Do not place it on a bedside table as the beam is a toroidal shape passing horizontally and in an upward direction, so it needs to be lower than the horizontal plane on which you sleep. The exception to this is where you have a unidirectional device (which are no longer made), where it should be placed on a bedside table at about the same height as the plane on which you sleep. Some people prefer the device underneath them while they sleep while others prefer it several meters away from them. Experiment and see what feels right for you.

Become familiar with and understand the gases in your new device

You can read and understand what each of the gases do by visiting the sections on Helium, Neon, Argon, Krypton and Xenon.

When working with inert gases how important is consciousness and your intention?

If you visualize where the changes are going to go, that is usually how they show up. And that is usually how the device is used. While you're sleeping, you hold the visualization of where the energy is going to go. However, some researchers have had experience with people in comas, or working with animals and plants, where the intent of the operator - the intent of the person near them - is also available and quite useful.

Create a two-line rhyming couplet for yourself describing this new way of being. Some examples:

  • My third eye can see, it is open and free.
  • From the Earth through my feet, energy whole and complete.
  • I have strength without fear, I am open, I am clear.
  • From head to toes, new life in me grows.
  • My blood is pure, my strength is sure.

Making one of these up for yourself is much more powerful than using any presented here. When you own it, create it, then visualize it, the effect is multiplied.

How do I switch the device off?

To switch the device off, you can either wrap it in lead sheet, or simply turn it upside down (in which case the beam points downwards and no longer into your environment).

Using the moon and astrology to determine when to apply inert gas energy beams and when to avoid them (this is more important than it initially seems!)

Here we open to an area that is highly suspicious to orthodox scientists, namely astrology. However, the researchers that wrote Einstein Does Not Work Here Anymore observed over a period of 7 years that when applying the rules below they got the best results. The great physician Hippocrates was convinced that no operation should be carried out on any part of the body that was ruled by the sign at the time of the operation. The moon spends around 2.5 days in each of the signs before moving onto the next sign of the zodiac.

apply inert gas energy beams

Click here here to determine what star sign the moon is currently in, and whether it is waning (crescent growing smaller) or waxing (crescent growing larger).

Work by these rules for the best success in your inert gas therapy treatments;

  1. When eliminating or shrinking thought forms, do this when the moon is waning
  2. When regrowing tissue, do this when the moon is waxing

If you are working on a specific part of your body, ensure that you do NOT apply the inert gas beams when the moon is associated with its corresponding sign on a specific day as shown in the table to the right.

Aries head, face, brain, eyes
Taurus throat, neck, thyroid gland, vocal tract
Gemini arms, lungs, shoulders, hands, nervous system, brain
Cancer chest, breasts, stomach, alimentary canal
Leo heart, chest, spine, spinal column, upper back
Virgo digestive system, intestines, spleen, nervous system
Libra kidneys, skin, lumbar region, buttocks
Scorpio reproductive system, sexual organs, bowels, excretory system
Sagittarius hips, thighs, liver, sciatic nerve
Capricorn knees, joints, skeletal system
Aquarius ankles, calves, circulatory system
Pisces feet, toes, lymphatic system, adipose tissue