Includes;
Note: The developers of this software recommend delivering the frequencies using speakers, something we at Natures Energies disagree with. We recommend using this software in conjunction with the Photon Sound Beam Complete to effectively deliver frequencies into the body.
Why cant we just use speakers to deliver frequencies into the body?
Using speakers to deliver the frequencies is ineffective, and when it comes to bodily organs, only the lower frequencies are going to get there with higher frequencies being absorbed by the skin.
Turn some music on and after a few seconds, then cover your ears with your hands and what do you hear? With a few centimeters of flesh cover your ears you only hear the lower sound frequencies (deeper bass musical notes), and no high frequencies (high treble notes) get through. In this experiment the sound is started in an air medium, and it is then travelling to another medium of greater density, that is your hand. How sound behaves in travelling from one medium to another is explained in a well written article titled The Obstruction of Sound. In that article it explains that the lower frequencies (which are larger than your body) pass through your hand but the higher frequencies (smaller than your body) are in fact absorbed and converted into heat on the surface of your hand (even though they do not produce a noticeable warming effect). In addition to this, because the ratio of acoustic characteristic impedance of air to that of water is about 1/3600, only a little energy generated by an airborne source could transmit into your body (click here for more explanation). We therefore have a problem when trying to direct frequencies into the body using speakers alone as we are going from one medium and into another. Some Rife software manufacturers are wrong in suggesting that we can use speakers alone, as the physics simply does not work.
To get results using this software, it is recommended that you use the headphones port on the computer to link the sound output to the Photon Sound Beam Complete (using the Aux function).
Life Frequencies Pro 3 is the ultimate Frequency Therapy system available. It's an accumulation of years of research and is the successor to our award-winning Life Frequencies Professional software.
Life Frequencies Pro 3 has the most extensive Rife Machine system available. It's easy for anyone to use. Until we released this technology, Rife Machines were very difficult to use, because they had to be programmed and required routine maintenance.
It includes :
Rife Pro X7 is an advanced, powerful, easy to use Rife Machine. It has capabilities that no other Rife Machines have. It helps people get rid of REAL life-threatening problems, every single day.
In the modern world, we have new health problems that simply cannot be eliminated with old technology. You can choose from 2133 Fast Presets, for almost any possible health problem you may encounter.
You get better results, faster. It has knocked out Lyme Disease in as little as two 40 minute sessions. Yeah - it's that good.
If you care about the technical aspects, read the stuff in blue. If not - skip it. You don't need to know it, because anyone slightly smarter than a chimpanzee can run Life Frequencies Pro - even if you're still dragging your knuckles a little bit.
Rife Pro X7 Technical :
About Audio Prescriptions.
Say you have a patient, relative or friend with a health issue and all they have is an iPhone or Android tablet. Simply record the Preset session and the OGG file can be emailed to someone and run on ANY computer, smart phone or tablet, using free OGG player apps available in the App stores (Note* On Android devices, no player App is required, because OGG files are the native audio file format for Android devices).
The Manual Rife / Structuring section of Life Frequencies Pro 3, is where you can input and modify your own frequencies. You can structure water and oils and make your own remedies using the presets or your own frequencies.
There may come a time when you want to do more with frequencies. The Manual / Structuring section of the program does just that.
Structuring is really easy to do! Simply click a button and run the frequencies through headphones or speakers into a container for 40 to 60 minutes and that’s all there is to it. The special algorithms in the program do all of the work.
Structuring allows you to easily create homeopathic remedies using water and oils.
Use Structuring For :
Manual Structuring Section Technical :
Auto Rife is a powerful Rife Machine for quick access. It's great for beginners and has all of the power of Rife Pro X7.
Auto Rife is the easiest Rife Machine to use - anywhere! We’ve taken 21 common problems, made powerful Rife Pro X7 chained presets and made them so you select a preset and click Start.
We’ve even set the levels and times. Anyone that can click in a selection box with a mouse and click Start can use Auto Rife.
The goal for making Auto Rife, was to make it very easy for even the beginner level computer user to start using Rife Technology.
Auto Rife completely automates everything!
TBSW stands for Trilateral Balanced Sine Waves. This new generation of healing, has become the powerful alternative to binaural beats.
Since it's release in 2008, TBSW technology can now be found in doctor's offices and hospitals around the globe.
TBSW Basics :
You've probably known or heard of someone having a car accident and not feeling a thing, even though they might have been pretty banged up. This is because the brain releases powerful pain relieving endorphins into the body during a trauma.
TBSW waves allow you to safely control these endorphins to get rid of pain naturally, by using special frequencies and waveforms. All you need to do is put headphones on your ears and run the frequencies.
TBSW does a lot more than get rid of pain. It can be used for addictions, insomnia, stress relief, weight loss, theta healing and more. TBSW enhances Binaural Beats and adds new dimensions. It's easy to use and has all of the tools you need to take healing and recovery to new levels.
There are 21 pre-programmed TBSW Presets in TBSW Pro. To run the presets, simply set the preset kind, background sound, time and click the Start button. And of course, you can enter your own frequencies as you become more experienced.
Built-In TBSW Presets
For Chiropractors, Doctors, Dentists and Physical Therapists, you can run one of the Pain Presets during or at the end of your session. It will leave you with very happy patients. Don't get left behind on this powerful technology!
TBSW Pro :
Chakras have been around since early recorded history. Since quantum physics has come into play lately, they are finally being seriously used in the western world - even by conventional medical practitioners.
Chakra Tools recharges the body like a battery charger. It does so by resonating the known Chakra frequencies, which causes them to balance and align. When they're balanced, the body is resistant to health problems, phobias, addictions and more.
This may sound strange to some of us in the west, but there are many people that use nothing except Chakra healing that live well over 100 years of age. This can easily be seen with Tibetan monks and other cultures.
Chakra Tools in Life Frequencies Pro 3:
For thousands of years there have been special frequencies used for healing work. Life Frequencies Pro 3 gives you the ability to use these special waveforms and frequencies to enhance your life.
These special healing frequencies have been highly effective and documented in different cultures around the world.
Ancient Tones encapsulates the most known, used and effective waveforms and frequencies used for millennia. Running these special frequencies in the background of a room can work wonders.
A normal frequency generator cannot generate these frequencies and waveforms correctly. Special processing is done by Life Frequencies Pro 3, to make them effective.
Ancient Tones :
The Sweep Generator is used for finding your own healing frequencies.
Holistic practitioners use the Sweep Generator in conjunction with Applied Kinesiology (muscle testing) to find frequencies. These frequencies can be logged using the Sweep Generator HIT button, transferred to Manual Rife / Structuring and saved to presets.
The Sweep Generator can also be used while observing things under a microscope. If you have a dark field or USB Microscope (like a Celestron Digital LCD Microscope), you can see the results the frequencies have on the organism.
The Sweep / Step Frequency Generator :
Sweep frequency generators are useful tools for frequency therapy. This one has all of the features of a very expensive lab grade generator.
Since we released the first version of Life Frequencies almost 10 years ago, we've learned quite a bit about how people like to use the programs. Life Frequencies Pro 3 has all of the features that make it easy for anyone to use.
Life Frequencies Pro 3 has a Client database that’s perfect for health practitioners, families and individuals. It allows you to keep track of symptoms, treatments, progress, medications and results and other information, without leaving the program.
The Client Database is very useful!
You can keep track of :
Life Frequencies Pro 3 has its own Notepad, so you can keep track of your experiments, frequencies and more, without ever leaving the program. This is very handy, especially when using the "HIT" button in the Sweep Generator when finding new healing frequencies.
The developers of the LFP software have primarily developed it for sound application, and they go on the theory that all frequencies are transmitted easily through water (i.e, our body). They therefore recommend that the frequencies are transmitted using speakers (and not headphones which are designed to only transmit sounds to the hearing). Speakers are recommended as they will transmit frequencies to the entire surface of the body. While the developers recommend transmission of frequencies through sound, it is our opinion at Natures Energies that sounds cannot be delivered efficiently into the body. If you put a pair of ear plugs into your ears, you will hear the lower frequency bass sounds and the higher treble frequencies will be muffled or muted. With the Photon Sound Beam Complete system, you can link the software to the unit (via Aux), and it is then transmitted to the patient via plasma tubes which contain additional wavelengths for penetrating deep into the body, something that is not achievable with sound alone. This is why we sell the LFP software provided on a computer, which the end user can purchase along with the Photon Sound Beam Complete system. You can read more about the Photon Sound Beam Complete, and how it links with the LFP software by visiting; http://www.photonsoundbeam.org/ (see the Aux section) https://www.naturesenergieshealth.com/natural-therapies/electro-medicine/photon-sound-beam/ The good thing about this system is that it is not only highly efficient - there is also very minimal noise that the system produces while the patient is being treated.